In this article we will learn about types of casting used in
manufacturing industries. Casting is a major manufacturing process which is
mostly used in heavy industries. Most of the components like outer casing of
turbine, lathe bed, valve casing, hydro turbine blades, Pelton wheel, Francis
runner and many other parts of major machinery are made by the casting. The
cast product has low strength compare to forging but any
difficult parts can be cast by this technology.
Types of Casting:
Casting is widely used any many different shapes and
material can be cast by it. There are various method of casting available which
are used for different shapes and material. Casting has following types.
Sand Casting:
It is widely used for casting different process. Sand is
easily available and has high refectory property so it is used in casting. It
is done by following steps.
- Design is made by using software or manually.
- A wooden pattern is created in pattern shop. Generally patterns are made into two half and can be increased accordingly to complexity.
- The pattern is placed into the flask and mixture of sand and clay with water pour into it. The runner, riser, core, gating system is also fit into it.
- When the mould gets hard the pattern is removed from mould and molten metal pour into it.
- The metal is allowed to get solidify into the casting.
- After solidification cast is removed from casting and send to machine shop for machining.
The sand casting is used for all metal and at low cost. An
another advantage is that it can be used
for very complex shape. It gives poor surface finish.
Shell Casting:
It is an another method of casting and used to cast thin
section like turbine blade etc. This casting is different from sand casting. A
metallic pattern is used in this type of casting. It consist following steps.
- First a metallic pattern is cast. The metal is used for casting is generally aluminum or cast iron
- The patterns is heated up to 250 degree and put into flask.
- The flask is filled with sand resin mixture. The resin gets solidify immediately after gating contact with heated pattern.
- After the sand solidify the pattern and the extra sand taken out. Now a shell of cavity is created. This shell is further heated into burner which allow proper bond.
- The metal is poured into the shell and allows to solidify.
- After solidification cast is removed from shell and send for machining.
Investment Casting:
In this type of process, wax pattern is used. The pattern is
first created by wax dipped into refectory material. This refectory material make
a shall outside the wax pattern. After it mould is heated which allow waxing out
from mould. Now the molten metal poured into cavity formed by it and allows solidifying.
The cast is taken out after proper solidification of cast and send for machining.
The main advantage of this process is that a very high accuracy
and surface finish can obtain by it. It is used for complex shape and batch
production.
Plaster Mould Casting:
These method uses plaster mould for casting. First plaster
mould is created using patterns. After removal of pattern, the plaster mould
allows to dry into an oven. After dried, molten metal is poured into it and
allow solidifying. After complete solidification cast is sand to the machine shop.
Mostly zinc and aluminum is used as molten metal. This casting is used to create
prototype.
Ceramic Mold Casting
Ceramic mold casting is same as investment casting but it
does not use wax pattern. The slurry of ceramic and liquid binder is pour on pattern
which is easily solidify. There is no wax pattern is used so there is no limitation
of size of casting. This type of casting is mainly used to cast heavy component like valve bodies,
military equipment etc.
Pressure Dies Casting:
This casting is mostly used to cast aluminum, lead etc. In
this casting a liquid metal is pumped at high pressure into a metallic die and allow
to solidify. The metal is allowed to solidify there and take out after solidification
.The die is again used for next cast. It is well suitable for batch production
of casting low melting point metal. It is not suitable for high melting temperature
metals. The tooling cost is also high.
Centrifugal Casting:
It is one of the most suitable casting processes of casting symmetrical
cylindrical component. In this process a liquid metal is poured at the center
of a rotating die. The die rotate and a centrifugal force act on the molten metal
which forces it to towards circumference. It is used to create hollow shape. The
light impurities crowed near center which is removed by machine. This process
eliminates the use for core and gating system. This type of casting is used to make pipes
etc.
Continuous Casting:
It is a different casting process which is used to create
continuous cast. In this process we do not use mould or cope and drag. It is
different in principle. In this process the molten metal poured into a trash which
is connected to a copper pipe. The copper pipe is surrounded by water cooling. The
metal is directly or immediately cooled after when running through pipe. The casting
product takes out from other side. This process continuously run and molten
metal continuously pour into it. It is used to create square or other shape simple
block which further used for rolling or other process.
These all are main types of casting. If you have any doubt
regarding this article, ask by commenting.